If you want to do this repeatedly, look into the --mirror option.For downloading other websites, --convert-links might also be useful, but I found that is not needed for Javadocs, which usually have the correct absolute and relative links.
Jdk 7 Api Docs Download
Download File: https://gohhs.com/2vDVnc
This downloads lots of the same copy of the index.html file with appended ?... names (for the FRAMES links on each page). You can remove these files after downloading by adding the --reject 'index.html\?*' option, but they still will be downloaded first (and checked for recursive links). I did not yet find out how to avoid downloading them at all. (See this related question on Serverfault.)
BTW, the same thinking applies to documenting any and all Java jars (with source) which you use. However, all versions of most jars will be found with their documentation available for download at Maven Central
[addendum 2020-01-13: if you have chosen not to include the Eclipse plugin in your build.gradle, it would appear that you can go (with the selection on your project in the Project Explorer) Right-click Gradle --> Refresh Gradle Project to get Eclipse to download the source files.]
I can only get to the online version here: I tried checking the Java EE Downloads page: But unfortunately, I cannot seem to find a link to download just the Java EE 7 API Documentation.Is there a way to download it in .zip for offline reference?
TheOracle Technology Network License Agreementfor Oracle Java SE is substantially different from prior Oracle JDK 8 licenses. This license permits certainuses, such as personal use and development use, at no cost -- but other uses authorized under prior Oracle JDKlicenses may no longer be available. Please review the terms carefully before downloading and using this product.FAQs are availablehere.
These downloads can be used for development, personal use, or to run Oracle licensed products. Use for otherpurposes, including production or commercial use, requires a Java SE subscription or another Oracle license.
Java EE 7 API Documentation provides API reference documentation for the packages and related APIs that make up the Java EE 7 platform. This documentation is generated from the source code by the Javadoc tool. After installation, the bundled API documentation can be accessed from install-dir/glassfish/docs/api/index.html.
If you need a different version of the gcloud CLI, install thecurrent version using the instructions that appear earlier on this pageand then log in. After you are logged in, you candownload earlier releases.To see the versions sorted by date, be sure to enable Sort and filterand click on the Created column.
Note on 32-bit versus 64-bit versions: You only need the 64-bit version of the SAP Java Connector if you are using a 64-bit Java VM. If you have to use a 32-bit Java VM on a 64-bit platform, download and use the 32-bit version of JCo. The 64-bit variant should always be preferred on 64-bit platforms.Some JVMs offer both modes: 32-bit as well as 64-bit. In this case you need to start the JVM with an additional start-up parameter to specify the mode. Usually these are options -d32 and -d64; please consult the JVM documentation for further details.
Note on 32-bit versus 64-bit versions: You only need the 64-bit version of the SAP Java Connector if you are using a 64-bit Java VM. If you have to use a 32-bit Java VM on a 64-bit platform, download and use the 32-bit version of JCo. But the 64-bit variant should always be preferred on 64-bit platforms, if feasible.Some JVMs offer both modes: 32-bit as well as 64-bit. In this case you need to start the JVM with an additional start-up parameter to specify the mode. Usually these are options -d32 and -d64; please consult the JVM documentation for further details.
Updates happen by installing a new version over an older version. See also the installation instructions included in the JCo SDK download archive. In general, a new SAP Java Connector patch level is downwards compatible to the previous patch levels of the same release.
The SAP Java Connector (JCo) and the SAP Java IDoc Library (JIDocLib) are available free of charge and can be downloaded from the SAP Support Portal. The license terms are pointed out on the download pages and in the documentation of these components.
Applications that run on Tomcat 9 and earlier will not run on Tomcat 10without changes. Java EE based applications designed for Tomcat 9 and earliermay be placed in the $CATALINA_BASE/webapps-javaee directory andTomcat will automatically convert them to Jakarta EE and copy them to thewebapps directory. This conversion is performed using theApache Tomcatmigration tool for Jakarta EE tool which is also available as a separatedownload for off-line use.
Welcome to the new home of the JavaMail API project on GitHub!This project hosts the downloads and source code for the JavaMail APIreference implementation. The JavaMail reference implementation islicensed under theCommon Development and Distribution License (CDDL) v1.1 and GNU General PublicLicense (GPL) v2 with Classpath Exception.
See Build Instructions for instructions on how todownload and build the most recent JavaMail source code. You can alsofind a bundle of the source code for the most recent JavaMail releasein the Releases area ofthis project.
While we recommend using a package manager to track the dependencies in your application, it is possible to download and use the Java SDK manually by downloading a pre-built jar file. Select the directory for the latest version and download one of these jar files:
Once you're up and running with the Java SDK, you'll find code samples using the latest version in our REST API docs and in the documentation for every Twilio product. You can also find auto-generated Javadoc for the latest Java SDK here.
Guided tutorials with hands-on coding to develop practical experience and build working code and apps. Start a Firebase codelab for iOS, Android, or Web. wysiwyg Reference documentation Formal reference documentation for Firebase SDKs, Firebase REST APIs, and Firebase tools. Find Firebase reference docs under the Reference tab at the top of the page.
The first two are specified in a dependencies block and the third in a repositories block. For example, to tell Gradle that your project requires version 3.6.7 of Hibernate Core to compile and run your production code, and that you want to download the library from the Maven Central repository, you can use the following fragment:
The Java Library Plugin provides a javadoc task of type Javadoc, that will generate standard Javadocs for all your production code, i.e. whatever source is in the main source set.The task supports the core Javadoc and standard doclet options described in the Javadoc reference documentation.See CoreJavadocOptions and StandardJavadocDocletOptions for a complete list of those options.
Please note that the API Reference document included with your installation may not be the most up-to-date version. For access to the latest additions, corrections, and clarifications you should download the latest files here and update your local copies as necessary.
Eclipse IDE- If you use the Eclipse IDE, you may want to install and use the AWS Toolkit for Eclipse, which will automatically download, install and update the Java SDK for you. For more information and setup instructions, see the AWS Toolkit for Eclipse User Guide.
If you are using one the above methods (for example, you are using Maven), then you do not need to download and install the AWS JAR files (you can skip the following section). If you intend to build your projects using a different IDE, with Apache Ant or by any other means, then download and extract the SDK as shown in the next section.
Only the latest version of the SDK is provided in pre-built form. However, you can build a previous version of the SDK using Apache Maven (open source). Maven will download all necessary dependencies, build and install the SDK in one step. Visit for installation instructions and more information.
Note: The canonical repository for Jetty is Maven Central. All releases are always available there first and this download page may lag a bit update wise as post release resources are put into place. You can always browse for Jetty releases here.
Binary packages for the IBM Semeru Runtime Open Edition are available in Windows Installer (.msi), macOS Installer (.pkg), and archive formats (.tar.gz and .zip). For manual downloads navigate to the IBM Semeru Runtimes downloads page, select a version and choose a package from the available platforms. For detailed installation instructions, see the Installation guide.
Note: If you are willing to accept downtime, you can simply take all the brokers down, update the code and start all of them. They will start with the new protocol by default.Note: Bumping the protocol version and restarting can be done any time after the brokers were upgraded. It does not have to be immediately after.Potential breaking changes in 0.9.0.0 Java 1.6 is no longer supported.
Scala 2.9 is no longer supported.
Broker IDs above 1000 are now reserved by default to automatically assigned broker IDs. If your cluster has existing broker IDs above that threshold make sure to increase the reserved.broker.max.id broker configuration property accordingly.
Configuration parameter replica.lag.max.messages was removed. Partition leaders will no longer consider the number of lagging messages when deciding which replicas are in sync.
Configuration parameter replica.lag.time.max.ms now refers not just to the time passed since last fetch request from replica, but also to time since the replica last caught up. Replicas that are still fetching messages from leaders but did not catch up to the latest messages in replica.lag.time.max.ms will be considered out of sync.
Compacted topics no longer accept messages without key and an exception is thrown by the producer if this is attempted. In 0.8.x, a message without key would cause the log compaction thread to subsequently complain and quit (and stop compacting all compacted topics).
MirrorMaker no longer supports multiple target clusters. As a result it will only accept a single --consumer.config parameter. To mirror multiple source clusters, you will need at least one MirrorMaker instance per source cluster, each with its own consumer configuration.
Tools packaged under org.apache.kafka.clients.tools.* have been moved to org.apache.kafka.tools.*. All included scripts will still function as usual, only custom code directly importing these classes will be affected.
The default Kafka JVM performance options (KAFKA_JVM_PERFORMANCE_OPTS) have been changed in kafka-run-class.sh.
The kafka-topics.sh script (kafka.admin.TopicCommand) now exits with non-zero exit code on failure.
The kafka-topics.sh script (kafka.admin.TopicCommand) will now print a warning when topic names risk metric collisions due to the use of a '.' or '_' in the topic name, and error in the case of an actual collision.
The kafka-console-producer.sh script (kafka.tools.ConsoleProducer) will use the Java producer instead of the old Scala producer be default, and users have to specify 'old-producer' to use the old producer.
By default, all command line tools will print all logging messages to stderr instead of stdout.
Notable changes in 0.9.0.1 The new broker id generation feature can be disabled by setting broker.id.generation.enable to false.
Configuration parameter log.cleaner.enable is now true by default. This means topics with a cleanup.policy=compact will now be compacted by default, and 128 MB of heap will be allocated to the cleaner process via log.cleaner.dedupe.buffer.size. You may want to review log.cleaner.dedupe.buffer.size and the other log.cleaner configuration values based on your usage of compacted topics.
Default value of configuration parameter fetch.min.bytes for the new consumer is now 1 by default.
Deprecations in 0.9.0.0 Altering topic configuration from the kafka-topics.sh script (kafka.admin.TopicCommand) has been deprecated. Going forward, please use the kafka-configs.sh script (kafka.admin.ConfigCommand) for this functionality.
The kafka-consumer-offset-checker.sh (kafka.tools.ConsumerOffsetChecker) has been deprecated. Going forward, please use kafka-consumer-groups.sh (kafka.admin.ConsumerGroupCommand) for this functionality.
The kafka.tools.ProducerPerformance class has been deprecated. Going forward, please use org.apache.kafka.tools.ProducerPerformance for this functionality (kafka-producer-perf-test.sh will also be changed to use the new class).
The producer config block.on.buffer.full has been deprecated and will be removed in future release. Currently its default value has been changed to false. The KafkaProducer will no longer throw BufferExhaustedException but instead will use max.block.ms value to block, after which it will throw a TimeoutException. If block.on.buffer.full property is set to true explicitly, it will set the max.block.ms to Long.MAX_VALUE and metadata.fetch.timeout.ms will not be honoured
Upgrading from 0.8.1 to 0.8.20.8.2 is fully compatible with 0.8.1. The upgrade can be done one broker at a time by simply bringing it down, updating the code, and restarting it.Upgrading from 0.8.0 to 0.8.10.8.1 is fully compatible with 0.8. The upgrade can be done one broker at a time by simply bringing it down, updating the code, and restarting it.Upgrading from 0.7Release 0.7 is incompatible with newer releases. Major changes were made to the API, ZooKeeper data structures, and protocol, and configuration in order to add replication (Which was missing in 0.7). The upgrade from 0.7 to later versions requires a special tool for migration. This migration can be done without downtime. 2. APIs Kafka includes five core apis:The Producer API allows applications to send streams of data to topics in the Kafka cluster.The Consumer API allows applications to read streams of data from topics in the Kafka cluster.The Streams API allows transforming streams of data from input topics to output topics.The Connect API allows implementing connectors that continually pull from some source system or application into Kafka or push from Kafka into some sink system or application.The Admin API allows managing and inspecting topics, brokers, and other Kafka objects.Kafka exposes all its functionality over a language independent protocol which has clients available in many programming languages. However only the Java clients are maintained as part of the main Kafka project, the others are available as independent open source projects. A list of non-Java clients is available here.2.1 Producer APIThe Producer API allows applications to send streams of data to topics in the Kafka cluster.Examples showing how to use the producer are given in thejavadocs.To use the producer, you can use the following maven dependency:org.apache.kafkakafka-clientsfullDotVersion2.2 Consumer APIThe Consumer API allows applications to read streams of data from topics in the Kafka cluster.Examples showing how to use the consumer are given in thejavadocs.To use the consumer, you can use the following maven dependency:org.apache.kafkakafka-clientsfullDotVersion2.3 Streams APIThe Streams API allows transforming streams of data from input topics to output topics.Examples showing how to use this library are given in thejavadocsAdditional documentation on using the Streams API is available here.To use Kafka Streams you can use the following maven dependency:org.apache.kafkakafka-streamsfullDotVersionWhen using Scala you may optionally include the kafka-streams-scala library. Additional documentation on using the Kafka Streams DSL for Scala is available in the developer guide.To use Kafka Streams DSL for Scala for Scala scalaVersion you can use the following maven dependency:org.apache.kafkakafka-streams-scala_scalaVersionfullDotVersion2.4 Connect APIThe Connect API allows implementing connectors that continually pull from some source data system into Kafka or push from Kafka into some sink data system.Many users of Connect won't need to use this API directly, though, they can use pre-built connectors without needing to write any code. Additional information on using Connect is available here.Those who want to implement custom connectors can see the javadoc.2.5 Admin APIThe Admin API supports managing and inspecting topics, brokers, acls, and other Kafka objects.To use the Admin API, add the following Maven dependency:org.apache.kafkakafka-clientsfullDotVersionFor more information about the Admin APIs, see the javadoc. 3. Configuration Kafka uses key-value pairs in the property file format for configuration. These values can be supplied either from a file or programmatically. 3.1 Broker Configs The essential configurations are the following: broker.id log.dirs zookeeper.connect Topic-level configurations and defaults are discussed in more detail below. advertised.listenersListeners to publish to ZooKeeper for clients to use, if different than the listeners config property. In IaaS environments, this may need to be different from the interface to which the broker binds. If this is not set, the value for listeners will be used. Unlike listeners, it is not valid to advertise the 0.0.0.0 meta-address. Also unlike listeners, there can be duplicated ports in this property, so that one listener can be configured to advertise another listener's address. This can be useful in some cases where external load balancers are used. 2ff7e9595c
Comments